• print this page
  • email this page

JOB OPENING DETAIL [REF: OPR-F]

Department Operations
Title Production Operator - Facilities
Reporting to Production Supervisor
Description
Outside unit operator responsible for the safe, efficient and effective operation and front line maintenance of the processes, systems and equipment in the assigned area of responsibility.
Operating Issuing Authority for the assigned area of responsibility for the PTW system.


1. The safe, efficient and effective monitoring and operation of all processes, systems, and equipment in the assigned area of responsibility.
2. The timely execution of the Planned Preventive Maintenance, (PPM Program), for the assigned area of responsibility as detailed in the 28 – 7 day plans, and recording of results in the Maximo.
3. The routine inspection, monitoring and recording of operating conditions in the daily shift Reading Sheets and the keeping of accurate daily / shift records of equipment and systems status and any changes in the daily logs.
4. The routine inspection & monitoring of the process consumables and the organization of replenishment(s) as required.
5. The routine starting /stopping of equipment &/or adjustments to the process & equipment as directed by the Control Room Operator (CRO).
6. The identification and reporting of corrective maintenance requirements/ corrosion / anomalies / structural defects within the assigned operating area.
7. Safe starting or shutting down of Units / Platform in co ordination with CRO.
8. Alternate and backfill as required with the Senior Operator-Tech.
9. Ensures his work area is well maintained and carries out house keeping in his area of responsibility.
10. Provide technical knowledge and experience in diagnosing and resolving operational problems, &/or identification of opportunities for improvement.
11. Provide accurate and clear communications to operations and facilities team personnel to enable meeting of team targets and goals.
12. Feedback to the Senior Op-Tech, CRO and Operations Supervisor any changes to production which affect work plans and schedules
13. Clear and accurate communication with the facilities support teams in the delivery of support services to the operations and maintenance efforts.
14. Understand and have detailed knowledge of the company’s Emergency Response Procedures.
15. Perform emergency response duties and tasks as defined in the company’s Emergency Response Procedures Manual and the installation station bill.
16. Perform emergency response duties as a Fire Team member.
17. Participate in STOP/ Horizon zero program and report all unsafe acts, behaviors and conditions.
18. Report all incidents to the supervisor.

PTW Area Responsibilities:
19. Undertake the planning, preparation, and execution of equipment &/or system isolation as required for routine PPM, Corrective Maintenance, maintenance &/or projects campaigns; &/or integrity verification inspection, as specified on the relevant work request and PTW.
20. Control access within his area of responsibility to engineering, inspection, maintenance, & /or facilities staff under the PTW system requirements & guidelines.
21. Continuously or periodically monitor the work activities and progress to ensure compliance with the PTW requirements and restrictions.
22. Ensure an accurate and complete handover to the next shift &/or operating team of the status of all ongoing works.
23. Undertake the final inspection at the completion of all works, ensuring the works have been completed satisfactory to the scope and PTW requirements; all tools, materials and debris removed; where applicable, determine that the equipment / system is deemed to be worthy of returning to service; and execute the closure of the PTW, & work request.

Process and Production Operation
24. Understand, monitor, check parameter Trends and intervene where necessary to ensure the safe, efficient and effective operation of the outside utility systems, oil processing, effluent treatment plant, and safety systems and equipment, whilst avoiding unnecessary processing upsets &/or equipment shutdowns.
25. Coordinate and monitor the routine utility, process, and effluent sampling and analysis, ensuring the results are within the quality and environmental control parameters, and making adjustments as required to meet prescribed QAQC standards, whilst optimizing on the consumables usage wherever possible.

Sea Water Treatment & Injection
26. Understand, monitor, check parameter Trends and intervene where necessary to ensure the safe, efficient and effective operation of the sea water lifting and filtration; sea water treatment and de-aeration, high pressure pumping system; utilities generation; and safety systems and equipment, whilst avoiding unnecessary processing upsets &/or equipment shutdowns.
27. Monitor the routine utility and process sampling and analysis, ensuring the results are within the quality and environmental control parameters, and making adjustments as required to meet prescribed QAQC standards, whilst optimizing on the consumables usage wherever possible.
28. Maintain water injection rate and pressure as recommended by engineering.
29. Assist with the preparation and execution of routine PPM maintenance.
30. Assist maintenance team whilst Crank Soak washing the gas turbine engines and generators.

Gas Lift Systems
31. Understand, monitor, check parameter Trends and intervene where necessary to ensure the safe, efficient and effective operation of the gas compression systems; gas lift circulation system, high pressure gas re-injection system; utilities generation; and safety systems and equipment, whilst avoiding unnecessary processing upsets &/or equipment shutdowns.
32. Monitor the routine utility and process sampling and analysis, ensuring the results are within the quality and environmental control parameters, and making adjustments as required to meet prescribed QAQC standards, whilst optimizing on the consumables usage wherever possible.
33. Assist with the preparation and execution of the routine PPM maintenance.
34. Assist maintenance team whilst Crank Soak washing the gas turbine engines.
35. Well Operations (Applicable for SWF only)
36. Understand, monitor and intervene where necessary to ensure the safe, efficient and effective operation of wells and process equipment. Ensures Safety system is fully functional. Eliminate unnecessary production loss and process upset by taking timely corrective action.
37. Perform trend analysis of gas injection rate, tubing and casing pressures of oil producing wells.
38. Carry out quality well testing and water cut analysis, document accurate well test report. Communicate any significant changes in production to Gas lift SPS/Area SPS. (Applicable for SWF only)
39. The routine well opening and shut-in, adjustments to the process & equipment as directed SPS/Senior Production Operator.
40. Assisting in the coordination of Wire line and well intervention activities.
41. Provide operational support on rig for drilling department during drilling/ work over operations.
42. Ensures his work area is well maintained and carries out house keeping in his area of responsibility.
Qualification
Educational Qualifications:
„X HSC / B.Sc., in Science / Diploma in Chemical engineering
Experience Profile:
„X 5 years offshore process operations experience, (or equivalent), including 1 or more of the following specializations:
„X Crude separation / stabilization.
„X Effluent treatment / disposal.
„X Gas compression, (turbo-machinery).
„X Sea water filtration, de-aeration, treatment, re-injection, (turbo-machinery).
„X Utilities, (Turbo-Power generation; electrical power distribution; pneumatic power compression & conditioning; water and fuels systems).
„X Controls & safeguard systems.
„X Gas / water / Hydro carbon treating / process plants.
Competencies/Skills/Others:
„X Good written and spoken English
Posted Date 04-09-2013
Closing Date 10-10-2015

Sign In

Enter your credentials to apply for the job

Register | Forgot Password